Ronex MP
Grease
RONEX™ MP is a lithium complex, mineral oil based multipurpose grease that can be used in a wide range of automotive and industrial applications. RONEX MP grease has good performance over a wide temperature range, and provides moderate load carrying, extreme pressure properties, water resistance, oxidation stability, and rust and corrosion protection. It is NLGI GC-LB qualified for use as a wheel bearing and chassis grease.
Datasheets
Features and Benefits
RONEX MP offers the following features and potential benefits:
• Excellent resistance to high temperature degradation for long service life helping to extend grease lubrication intervals.
• Enhanced extreme-pressure and anti-wear properties helps protect moving surfaces from wear; leading to extended component life.
• Excellent high- and low-temperature performance helps minimize cold-weather dispensing problems.
• Good water-resistance properties for reliable grease performance in hostile aqueous environments.
Applications
RONEX MP is a multi-purpose grease recommended by ExxonMobil for both industrial and automotive applications such as:
• Industrial - Plain and rolling element bearings, gears
• Automotive – Light Truck, Bus and Construction applications requiring an NLGI GC-LB qualified grease such as:
• Wheel Bearings
• Ball Joints
• Chassis lubrication points
Specifications and Approvals
|
This product has the following approvals: |
|
Ford WSS-M1C267-A1 |
|
This product meets or exceeds the requirements of: |
|
DIN 51825:2004-06 - KP 2 K -30 L |
|
NLGI GC-LB |
Properties and Specifications
|
Property |
|
|
Grade |
NLGI 2 |
|
Thickener Type |
Lithium Complex |
|
Base Oil Viscosity of Greases @ 40 C, mm2/s, AMS 1697 |
115 |
|
Color, Visual |
Green |
|
Copper Strip Corrosion, 24 h, 100 C, Rating, ASTM D4048 |
1A |
|
Corrosion Preventive Properties, Rating, ASTM D1743 |
PASS |
|
Dropping Point, °C, ASTM D2265 |
280 |
|
Four-Ball Extreme Pressure Test, Weld Point, kgf, ASTM D2596 |
250 |
|
Four-Ball Wear Test, Scar Diameter, mm, ASTM D2266 |
0.5 |
|
Penetration, 60X, 0.1 mm, ASTM D217 |
280 |
|
SKF Emcor Rust, distilled water, IP 220 |
0,0 |
|
Timken OK Load, lb, ASTM D2509 |
45 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx