Mobil SHC 500™ Series
Get up to three times longer protection with Mobil SHC™ 500 Series synthetic hydraulic oils.
Our Mobil SHC™ 500 Series synthetic hydraulic oils are designed to provide excellent wear protection for high-pressure vane, piston and gear pumps operating in a wide range of temperatures. They are formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.
Mobil SHC 500 Series hydraulic oils can reduce energy consumption by up to 6.2 percent compared to conventional hydraulic oils*. They can also:
- Extend equipment and filter life
- Improve hydraulic efficiency
- Increase system cleanliness and durability
- Decrease machine maintenance
- Extend oil drain intervals
Reduces energy consumption
up to 6.2%*Add up your savings
Use our calculator tools to estimate your operation’s potential savings for upgrading your conventional lubricant to Mobil SHC™ oil or grease. Then contact an ExxonMobil engineer or authorized dealer to further refine your estimate.
Product series information
{0} offers {1} lubricant grades
<%= raw.productdescription%>
<%= raw.marketindustrialproducttypeandfeature %> <% } else { %> <%= title ? title : '' %>
<%= raw.productdescription%>
<%= raw.marketindustrialproducttypeandfeature %> <% } %>
Features and Benefits
The Mobil SHC 500 Series hydraulic oils exhibit outstanding low and high temperature performance helping to provide an extra margin of equipment protection above and beyond the capabilities of comparable mineral oil-based products. Their excellent oxidation resistance allows extension of oil and filter change intervals while assuring exceptionally clean systems and trouble-free operation. Their high level of anti-wear properties and excellent film strength characteristics result in exceptional equipment performance that helps prevent unplanned equipment breakdowns, and maximize equipment uptime, which can enable potential improvements in production capacity. Their controlled demulsibility permits the oils to work well in systems contaminated with small amounts of water yet readily separate large amounts of water.
Features |
Advantages and Potential Benefits |
Design-Specific Synthetic Base stock |
Helps extend service intervals Cleaner system and reduced close-tolerance valve sticking compared to conventional products Helps improve filterability |
Exceptional Anti-wear |
Helps reduce wear of components Helps protect systems using various metallurgy |
High Viscosity Index |
Wide temperature range performance Helps to ensure equipment protection at cold start-up temperatures Helps protect system components at high operating temperatures |
Outstanding Oxidation Stability |
Helps provide long oil and equipment life, which can extend filter life |
Excellent Corrosion Protection |
Helps prevent internal hydraulic system corrosion Helps reduce the negative effects of moisture in systems Helps provide corrosion protection of multi-metallurgy component designs |
Very Good Multi-metal Compatibility |
Helps optimize inventory requirements |
Meets a Wide Range of Equipment Requirements |
One product can replace several helping to optimize inventory requirements and mitigate potential product misapplication |
Excellent Air Separation Characteristics |
Helps reduce foaming and it's negative effects |
Controlled Demulsibility |
Provides systems protection and lubrication where small quantities of moisture are present Readily separates larger quantities of water |
Innovative Keep Clean Properties |
Helps reduce system deposits and potential sludging Helps protect critical components such as servo-valves, improving system response and minimizing valve sticking |
Applications
• Hydraulic systems prone to deposit build-up such as sophisticated Numerically Controlled (NC) machines, particularly where close clearance servo-valves are used
• Systems employing multi-metal component designs
• High pressure vane, piston and gear pumps
• Systems where cold start-up and / or very high operating temperatures are typical
• Where small amounts of water are unavoidable
• In systems containing gears and bearings
• Systems requiring a high degree of load-carrying capability and anti-wear protection
• Applications where thin oil-film corrosion protection is an asset such as in systems containing moisture
Specifications and Approvals
This product has the following approvals: |
524 |
525 |
526 |
DENISON HF-0 |
X |
X |
X |
DENISON HF-1 |
X |
X |
X |
DENISON HF-2 |
X |
X |
X |
Properties and Specifications
Property |
524 |
525 |
526 |
527 |
Grade |
ISO 32 |
ISO 46 |
ISO 68 |
ISO 100 |
Brookfield Viscosity @ -18 C, mPa.s, ASTM D2983 |
923 |
1376 |
2385 |
4500 |
Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130 |
1B |
1B |
1B |
1B |
Density @ 15 C, kg/l, ASTM D4052 |
0.853 |
0.852 |
0.854 |
0.858 |
Emulsion, Time to 40/37/3, 54 C, min, ASTM D1401 |
20 |
20 |
20 |
|
Emulsion, Time to 40/37/3, 82 C, min, ASTM D1401 |
20 |
|||
FZG Scuffing, Fail Stage, DIN 51354 |
9 |
10 |
11 |
11 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
234 |
238 |
240 |
243 |
Foam, Sequence I, Stability, ml, ASTM D892 |
0 |
50 |
0 |
0 |
Foam, Sequence I, Tendency, ml, ASTM D892 |
50 |
50 |
50 |
50 |
Foam, Sequence II, Stability, ml, ASTM D892 |
0 |
0 |
0 |
|
Foam, Sequence II, Tendency, ml, ASTM D892 |
50 |
0 |
50 |
50 |
Foam, Sequence III, Stability, ml, ASTM D892 |
0 |
0 |
0 |
0 |
Foam, Sequence III, Tendency, ml, ASTM D892 |
50 |
50 |
50 |
50 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
6.4 |
8.54 |
11.52 |
15.94 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
32 |
46 |
68 |
100 |
Pour Point, °C, ASTM D97 |
-56 |
-54 |
-53 |
-52 |
Rust Characteristics, Procedure B, ASTM D665 |
PASS |
PASS |
PASS |
PASS |
Viscosity Index, ASTM D2270 |
144 |
154 |
158 |
160 |
Health and Safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx