Mobil™ Agri Extra 10W-40
Mobil commercial-vehicle-lube , Turkey
Product Description
Mobil™ Agri Extra 10W-40 is a synthetic blend, extra high performance, multi-functional lubricant for most farm equipment applications. This STOU lubricant provides excellent performance in diesel and gasoline engines, transmissions, hydraulics, final drives, and oil-immersed brakes operating in agricultural service. It is engineered using high quality base stocks and an optimised additive system. Mobil Agri Extra 10W-40 lubricant is recommended for use in a wide range of severe duty applications and extreme operating environments found in the farming industry.
Features and Benefits
Agricultural enterprises employ a wide variety of equipment requiring multi-functional lubrication performance. The advanced technology in Mobil Agri Extra 10W-40 meets the diverse lubrication requirements of this equipment, which reduces the number of lubricants required, and the possibility of misapplication. The key benefits include:
|
Features |
Advantages and Potential Benefits |
|
Reduced sludge build-up and high temperature deposits |
Excellent thermal and oxidation stability |
|
TBN reserves |
Improved deposit control |
|
Good rust and corrosion protection |
Reduced wear and long equipment life especially in hydraulic components |
|
Effective detergency/dispersancy |
Cleaner engines and long engine life |
|
High temperature viscosity retention and volatility control |
Reduced engine scuffing, bore polishing, and oil consumption |
|
Effective frictional and load carrying properties |
Increased power, improved power train performance, and elimination of chatter in wet brakes |
|
Excellent low temperature pumpability and performance |
Easier engine start-up, reduced wear in critical valve train and good hydraulic response |
|
Component compatibility |
Longer gasket and seal life |
|
Multipurpose product |
Reduces inventory and chance for misapplication |
Applications
• Mixed diesel and gasoline-powered farm vehicles and equipment
• Farm equipment transmissions and power systems requiring multifunctional fluid
Specifications and Approvals
|
This product has the following approvals: |
|
ZF TE-ML 07B |
|
ZF TE-ML 06B (*) |
|
This product is recommended for use in applications requiring: |
|
ACEA E3 |
|
Allison C-4 |
|
API CE |
|
API CF |
|
API CF-4 |
|
API CG-4 |
|
API GL-4 |
|
API SF |
|
Caterpillar TO-2 |
|
CNH MAT 3525 |
|
CNH MAT 3526 |
|
Ford ESEN-M2C86-B |
|
FORD ESN-M2C134-D |
|
Ford ESN-M2C159-B |
|
JICASE MS 1206 |
|
JICASE MS 1207 |
|
JICASE MS 1209 |
|
JOHN DEERE JDM J27D |
|
MASSEY FERGUSON CMS M1139 |
|
MASSEY FERGUSON CMS M1144 |
|
MASSEY FERGUSON CMS M1145 |
|
This product meets or exceeds the requirements of: |
|
JOHN DEERE JDM J20C |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 10W-40 |
|
Cold-Cranking Simulator, Apparent Viscosity @ -25 C, mPa.s, ASTM D5293 |
6600 |
|
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 |
131000 |
|
Viscosity Index, ASTM D2270 |
146 |
|
Total Base Number, mgKOH/g, ASTM D2896 |
12 |
|
Pour Point, °C, ASTM D97 |
-42 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
93 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
13.5 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
229 |
|
Density @ 15 C, g/ml, ASTM D1298 |
0.86 |
|
Ash, Sulfated, mass%, ASTM D874 |
2 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
07-2021