Mobil SHC™ Grease 100 EAL Series

Mobil grease , Portugal

Grease

Product Description

Mobil SHC™ Grease 101 EAL and 102 EAL are superior performance greases designed specifically for applications that require environmentally sensitive lubricants. These high performance greases are biodegradable and virtually non-toxic. They are formulated from a biodegradable synthetic ester base oil, carefully chosen high performance additives and a lithium soap thickener. The wax-free nature of the synthetic base fluid, together with its low traction coefficient, provide excellent low temperature pumpability and very low starting and running torque - a significant benefit considering that many environmentally sensitive applications are outdoors.

 

The Mobil SHC Grease 100 EAL Series is formulated for applications where grease leakage or run out could contaminate soil, groundwater, surface water systems, or indoor plant water systems. They are recommended for plain and rolling element bearings and couplings that operate at temperatures from -40ºC to 120ºC, with appropriate adjustments to re-lubrication interval. Mobil SHC Grease 101 EAL and 102 EAL are NLGI grade 1 and 2 respectively.

 

Features and Benefits

Mobil SHC Grease 101 EAL and 102 EAL offer the following benefits:

The Mobil™ EAL brand of environmentally sensitive products has gained an exceptional reputation with OEMs and customers for its excellent performance. These greases provide the optimum balance between the need for environmentally friendly lubricants and the requirement for high performance lubricants for mobile and stationary mechanical equipment Mobil SHC Grease 100 EAL Series greases are compatible with the previous generation Mobilgrease EAL 100 Series.

 

Features

Advantages and Potential Benefits

Virtually non-toxic in the OECD 203 Method Aquatic Toxicity Test

Minimal effects of spills on environment

Formulated from biodegradable synthetic ester base oil

Biodegradation of material in sensitive areas with minimal non-biodegradable residue, avoidance of costly clean-up in some jurisdictions

Good adhesion and water resistance

Resists water washout, avoiding need for frequent re-greasing

Excellent rust and corrosion protection

Excellent bearing protection in wet conditions, with long bearing life

 

Applications

Mobil SHC Grease 101 EAL and 102 EAL are members of the Mobil family of Environmental Awareness Lubricants (EAL) and are specifically designed for applications where contamination of the environment is a risk.

     •  Marine equipment

     •  Water treatment plants

     •  Dams, locks and water ways

     •  Construction equipment

     •  Farm machinery

     •  Hydroelectric generation plants

 

Specifications and Approvals

This product meets or exceeds the requirements of:

101

102

DIN 51825:2004-06 - KP E 1 K -40

X

 

DIN 51825:2004-06 - KP E 2 K -40

 

X

 

Properties and Specifications

Property

101

102

Grade

NLGI 1

NLGI 2

Thickener Type

Lithium

Lithium

Copper Strip Corrosion, 24 h, 100 C, Rating, ASTM D4048

1A

1A

Corrosion Prevention, Rating, ASTM D1743

Pass

Pass

Dropping Point, °C, ASTM D2265

180

180

Four-Ball Extreme Pressure Test, Weld Load, kgf, ASTM D2596

200

200

Penetration, 60X, 0.1 mm, ASTM D217

325

280

Viscosity @ 40 C, Base Oil, mm2/s, ASTM D445

100

100

Water Washout, Loss @ 79 C, wt%, ASTM D1264

8

6.5

 

Health and Safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

04-2024

ExxonMobil Lubricants and Specialties Europe division of ExxonMobil Petroleum & Chemical b.v.b.a.
Polderdijkweg
B-2030 Antwerpen, Belgium

http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.