Mobil Super™ 3000 X1 FORMULA FE 5W-30
Mobil passenger-vehicle-lube , Papua New Guinea
Product Description
Mobil Super™ 3000 engine oil series are synthetic and engineered to deliver outstanding protection.
Mobil Super™ 3000 x1 Formula FE 5W-30 provides long engine life with enhanced protection over a wide temperature range for many types and ages of vehicles including passenger cars, light commercial vehicles and vans.
Features and Benefits
Mobil Super™ 3000 x1 Formula FE 5W-30 provides:
• Enhanced high temperature protection
• Enhanced cold start-up performance
• Enhanced engine cleanliness and sludge prevention
• Enhanced wear protection
• Helps fuel economy (as per ACEA A5/B5)
• Suitable for use in both gasoline and diesel engine passenger cars, light commercial vehicles and vans.
Applications
Mobil Super 3000 x1 Formula FE 5W-30 is recommended if you regularly experience demanding conditions where it can help combat the damage caused by frequent high engine stress.
• Mobil Super 3000 x1 Formula FE 5W-30 can be used in a variety of gasoline and diesel automobiles, light trucks and vans designed for use of a low viscosity (HTHS) motor oil.
• Mobil Super 3000 x1 Formula FE 5W-30 is intended primarily to meet the requirements of Ford in all engines requiring WSS-M2C913-D/C but is also suitable for use in Jaguar & Land Rover vehicles calling for STJLR.03.5003.
Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle.
Specifications and Approvals
This product has the following approvals: |
Ford WSS-M2C913-D |
This product is recommended for use in applications requiring: |
API CF |
This product meets or exceeds the requirements of: |
API SL |
API SN Engine Test Requirements |
Ford WSS-M2C913-C |
ACEA A5/B5 |
Properties and Specifications
Property |
|
Grade |
SAE 5W-30 |
Ash, Sulfated, mass%, ASTM D874 |
1.1 |
Density @ 15 C, g/ml, ASTM D4052 |
0.85 |
Flash Point, °C, ASTM D92 |
222 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
9.8 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
53 |
Phosphorus, mass%, ASTM D4951 |
0.09 |
Pour Point, °C, ASTM D97 |
-39 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2024