Mobil 1™ ESP X2 0W-20
Mobil passenger-vehicle-lube , New Zealand
Product Description
Mobil 1™ ESP X2 0W-20 is an advanced full synthetic engine oil specifically designed to provide outstanding wear protection, engine cleanliness, strong durability and advanced fuel economy* to keep your engine running like new.
Mobil 1™ ESP X2 0W-20 combines durability and protection with a low viscosity, low friction engine oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs).
Mobil 1™ ESP X2 0W-20 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered vehicles that require SAE 0W-20 viscosity grades.
* compared vs Mobil 1 ESP Formula 5W-30.
Features and Benefits
Mobil 1™ ESP X2 0W-20 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters (CAT's). Mobil 1™ ESP X2 0W-20 has been designed to help deliver outstanding performance and protection in conjunction with fuel economy benefits.
Key features and potential benefits include:
• Reduce particulate buildup in diesel particulate filters
• Reduce poisoning of gasoline catalytic converters
• Reduce deposits and sludge buildup to enable long and clean engine life
• Reduce oil aging, allowing extended drain interval protection
• Aid fuel economy
Applications
Mobil 1™ ESP X2 0W-20 is recommended for high-performance gasoline and diesel engines in the latest passenger cars, SUVs and light vans that require SAE 0W-20 viscosity grades.
• Mobil 1™ ESP X2 0W-20 helps to protect exhaust gas after-treatment systems designed to limit engine emissions.
• Mobil 1™ ESP X2 0W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
**** Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications
Specifications and Approvals
This product has the following approvals: |
MB-Approval 229.71 |
Porsche C20 |
VW 508 00 |
VW 509 00 |
This product meets or exceeds the requirements of: |
ACEA C5 |
ACEA C6 |
API SN PLUS ENGINE TEST REQUIREMENTS |
API SP ENGINE TEST REQUIREMENTS |
Properties and Specifications
Property |
|
Grade |
SAE 0W-20 |
Density, 15.6C, g/cm3, ASTM D4052 |
0.842 |
Total Base Number, mgKOH/g, ASTM D2896 |
8.4 |
Viscosity Index, ASTM D2270 |
180 |
Pour Point, °C, ASTM D97 |
-60 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
230 |
Ash, Sulfated, mass%, ASTM D874 |
0.8 |
Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684 |
10000 |
Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683 |
2.6 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
8 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
40 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
05-2024