MOBILCUT 140 BF
Mobil industrial , Norway
Product Description
Mobilcut is the trademark for Mobil Industrial lubricants line of high performance water miscible metal removal fluids. Formulated with leading edge base oils, additives, and emulsifiers, the Mobilcut series of non-chlorinated products provides dependable performance in a wide array of metal removal processes. The products are designed to work in a variety of hard and soft water qualities and offer low foam potential and long-term corrosion protection for machine and components. Low maintenance and inherently stable, Mobilcut products are designed for the modern machine shop where long service life, excellent machining performance, health and environmental concerns are important factors for increased productivity. These products are supplied in concentrated form and require mixing with water at the point of use. All Mobilcut products are free of formaldehyde release agents (FAD).
Mobilcut 140 BF is a long life, boron free, water soluble fluid making it an ideal choice for grinding and general machining application in the modern machine shop. It is formulated to provide long service life, good emulsion stability and durability while helping to increase tool life and surface finish, even in difficult machining operations. Mobilcut 140 BF is an ideal choice where excellent machining performance is required for a wide variety of materials and applications, while being easy to monitor and maintain. It can work well with very soft water ( 5 °dH) and the emulsion is stable in use in very hard water (up to 60 °dH).
Features and Benefits
The Mobilcut series are designed to help increase the productivity of modern machine shops by providing high performance features.
|
Features |
Advantages and Potential Benefits |
|
Form stable emulsions and solutions |
Ease of use and maintenance |
|
Long term inherent stability |
Increases batch life and reduces unpleasant odors |
|
Low foaming potential |
Improved performance even in high pressure systems |
|
Resists formation of sticky residues |
Improves machine cleanliness |
|
High degree of corrosion protection |
Reduces machine maintenance and rework of materials |
|
Good separability from fines |
Improves filterability and surface finish |
|
Wide Range of applicability |
Potential to consolidate products and reduce inventories |
|
Compatible with high performance Mobil Vactra Oil No slideway lubricants |
Easy separation and removal of tramp oil |
|
Neutral Odor |
Enhances the workplace environment |
|
Boron free |
For Regulatory compliance |
Applications
Mobilcut 140 BF: Grinding and machining of cast iron and for a wide variety of materials in moderate to heavy duty operations such as milling, turning, sawing, boring, drilling and reaming where the lubricity of a soluble oil is desired.
Fluid type is micro emulsion. Mineral oil content is typically 30%. Water hardness range is from 5 to 30 °dH. Its typical refractometer factor is 1.3, due to production tolerances this value might vary slightly.
Recommended concentrations for typical operations:
Cylindrical & Surface grinding: 5-7%
Low alloy steels - milling, turning: 6-8%
Carbon alloy steels, difficult machining: 8-12%
Aluminum machining: 8-10%
Properties and Specifications
|
Property |
|
|
Grade |
N/A |
|
Kinematic Viscosity 20 C, mm2/S, ASTM D7042 |
120 |
|
pH-Value 5.0% in 20 deg dH Water, DIN 51369 |
10.1 |
|
Density 15 C, kg/m3, DIN EN ISO12185 |
986 |
|
Appearance, AA.Lab.101 |
yellow, turbid |
|
Appearance, 5.0% in 20 deg dH Water, AA.Lab.101 |
translucent |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
05-2024