Mobil Delvac MX™ F2 15W-40
Mobil commercial-vehicle-lube , Mexico
Product Description
Mobil Delvac MX™ F2 15W-40 is a high performance diesel engine oil that helps extend engine life in severe on and off highway applications. The advanced chemistry of these products delivers exceptional performance in both modern, high-output engines including those with Exhaust Gas Recirculation (EGR), as well as older engines operating on either low or high sulfur fuels. As a result, Mobil Delvac MX™ F2 15W-40 meets or exceeds the API CI-4 PLUS service category.
Mobil Delvac MX™ F2 15W-40 is recommended by ExxonMobil for use in a wide range of heavy duty applications and operating environments found in the trucking, mining, construction, quarrying, marine and agricultural industries. These products will provide outstanding protection in the most demanding diesel engines of Caterpillar, Cummins, Detroit, Mack, Navistar, Volvo, and others. Mobil Delvac MX™ F2 15W-40 also meets or exceeds the API SL specification for gasoline engines and mixed fleets.
The outstanding performance reserve of Mobil Delvac MX™ F2 15W-40 is the result of extensive cooperative development work with major Original Equipment Manufacturers (OEMs) and advanced additive chemistry with patented Trimer technology. These enhancements assure excellent control of oil thickening due to soot build-up and exposure to higher temperatures and provide outstanding resistance to oxidation, corrosion, wear, and high temperature deposits.
Features and Benefits
Modern high output diesel engines including those using EGR technology generate higher levels of soot and run at higher temperatures than older, naturally aspirated engines, which significantly increases the demands on engine lubricants. These engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher on the piston bringing the oil film closer to the combustion chamber where higher temperatures increase thermal stress on the lubricant. Higher fuel injector pressure and retarded timing improve exhaust emission control, but also increase engine temperatures and increase soot loads, including those engines operating with EGR. The key benefits include:
Features |
Advantages and Potential Benefits |
Outstanding thermal and oxidation stability |
Reduced low temperature sludge build-up and high temperature deposits |
Extended TBN reserves |
Improved soot handling and extended drain intervals |
Stay-in-grade shear stability |
Reduced oil consumption and wear protection Maintains viscosity in severe, high temperature service |
Excellent low temperature pumpability |
Easier engine start-up and reduced wear |
Superb resistance to corrosion |
Longer life of critical wear surfaces |
Applications
Recommended by ExxonMobil for use in:
• High performance diesel applications including pre-2007 turbo-charged, low emission engines designs, including those featuring EGR technology
• On highway applications operating in both high speed/high load and short haul pick-up/delivery
• Off highway applications operating in severe low speed/heavy load conditions
• Modern marine high-speed diesel engines, including Caterpillar, Cummins, Volvo, Daihatsu, and Yanmar.
• High performance gasoline engines and mixed fleet operators
• Diesel-powered equipment from American and Japanese OEMs
• On highway heavy duty trucking and off highway including: construction, mining, quarrying, and agriculture
Specifications and Approvals
This product has the following approvals: |
Cummins CES 20078 |
Cummins CES 20077 |
MACK EO-M PLUS |
VOLVO VDS-3 |
Detroit Detroit Fluids Specification 93K214 |
DQC II-18 |
Mack EO-N |
MB-Approval 228.3 |
RENAULT TRUCKS RLD-2 |
DTFR 15B110 |
CUMMINS CES 20076 |
This product is recommended for use in applications requiring: |
API CG-4 |
API CF |
ACEA E5-02 |
VOLVO VDS-2 |
MACK EO-M |
MAN M 3275-1 |
CUMMINS CES 20072 |
CUMMINS CES 20071 |
API CF-4 |
RENAULT TRUCKS RLD |
This product meets or exceeds the requirements of: |
API CI-4 PLUS |
API CI-4 |
API CH-4 |
API SL |
API SJ |
Caterpillar ECF-2 |
ACEA E7 |
Caterpillar 1E1867 |
Ford WSS-M2C171-D |
Properties and Specifications
Property |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
15.3 |
Density @ 15 C, kg/l, ASTM D4052 |
0.870 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
110 |
Flash Point, °C, ASTM D92 |
223 |
Viscosity Index, ASTM D2270 |
145 |
Pour Point, °C, ASTM D97 |
-36 |
Total Base Number, mgKOH/g, ASTM D2896 | 11 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
08-2024