Mobil 1™ ESP 5W-30
Mobil passenger-vehicle-lube , Sri Lanka
Product Description
Mobil 1™ ESP 5W-30 is advanced full synthetic motor oil has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in both diesel and gasoline-powered automobiles.
It meets or exceeds the requirements of many leading industry and car manufacturers' standards required for newer modern passenger car engines, including Volkswagen, Mercedes-Benz and General Motors approvals, as well as Japanese and Korean vehicles that specifically call for a SAE 5W-30 viscosity grade and any of the specifications the oil supports.
Features and Benefits
Mobil 1™ ESP 5W-30 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF) and Gasoline Catalytic Converters (CAT).
Mobil 1™ ESP 5W-30 has been designed to help deliver outstanding performance and protection in conjunction with fuel economy benefits. Key features and potential benefits include:
|
Features |
Advantages and Potential Benefits |
|
Low Ash content |
Helps to reduce particulate build-up in Diesel Particulate Filters |
|
Low Sulphur and Phosphorous content |
Helps to reduce poisoning of Gasoline Catalytic Converters |
|
Active cleaning agents |
Helps to reduce deposits and sludge build-up to enable long and clean engine life |
|
Outstanding thermal and oxidative stability |
Helps to reduce oil aging allowing extended drain interval protection |
|
Low oil consumption formulation |
Less hydrocarbon pollution |
|
Enhanced frictional properties |
Aids fuel economy |
|
Excellent low temperature capabilities |
Quick cold weather starting and fast protection to help extend engine life |
Applications
Recommended for all types of modern automobile engines found in the latest passenger cars, SUVs and light vans.
• Mobil 1™ ESP 5W-30 is a low ash content (ACEA C3 mid SAPS) engine oil to help protect exhaust gas after-treatment systems designed to limit engine emissions.
• Mobil 1™ ESP 5W-30 is especially suitable for extreme conditions, where conventional oil often may not perform.
• Mobil 1™ ESP 5W-30 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer. Owner's manual should be consulted for recommended viscosity grade and specification.
• Mobil 1™ ESP 5W-30 is also suitable for hybrid engines that require API SP, ACEA C3 specifications.
Specifications and Approvals
|
This product has the following approvals: |
|
Porsche C30 |
|
BMW Longlife 04 |
|
MB-Approval 229.31 |
|
MB-Approval 229.51 |
|
MB-Approval 229.52 |
|
VW 504 00 |
|
VW 507 00 |
|
OV 040 1547 – D30 |
|
OV 040 1547 – G30 |
|
This product is recommended for use in applications requiring: |
|
Recommended by ExxonMobil for applications requiring ACEA C2 |
|
FIAT 9.55535-S3 |
|
This product meets or exceeds the requirements of: |
|
API SP |
|
API SN PLUS |
|
API SN |
|
ACEA C3 |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 5W-30 |
|
Mini-Rotary Viscometer, Apparent Viscosity, -35 C, mPa.s, ASTM D4684 |
23200 |
|
Viscosity Index, ASTM D2270 |
175 |
|
Density @ 15.6 C, g/ml, ASTM D4052 |
0.852 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
11.9 |
|
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
3.5 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
67 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
234 |
|
Ash, Sulfated, mass%, ASTM D874 |
0.8 |
|
Total Base Number, mgKOH/g, ASTM D2896 |
8.4 |
|
Pour Point, °C, ASTM D97 |
-42 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2024