Mobil 1 Extended Life 10W-60
Mobil passenger-vehicle-lube , Ireland
Advanced Full Synthetic Engine Oil
Product Description
Mobil 1 is the world’s leading synthetic engine oil brand delivering our ultimate performance and protection.
Mobil 1 Extended Life 10W-60 is engineered for the specific demands of older vehicles.
Features and Potential Benefits
Mobil 1 Extended Life 10W-60 is engineered to help provide long lasting protection in higher mileage engines so you can get long life out of your vehicle.
- Extra seal conditioners to help prevent oil leaks
- Helps to reduce sludge build up to keep engines clean and prevent wear
- Outstanding/Excellent oil film thickness for extra protection in older engines
- Higher viscosity to help reduce oil burn off in older engines
- More anti-wear additives to help protect worn engines
- High performance basestocks for excellent all-round wear protection
Applications
Mobil 1 Extended Life 10W-60 has been designed to help provide the extra protection that older engines can demand. It is suitable for virtually all types of older vehicles and operating conditions.
- Older vehicles
- Nearly all operating conditions, from mild to extreme
- An ideal product for Racing applications
Always consult your owner’s manual to check recommended viscosity grade and specifications for your particular vehicle.
Specifications and Approvals
| Mobil 1 Extended Life 10W-60 meets or exceeds the requirements of: | |
| API SN/SM/SL | X |
| ACEA A3/B3, A3/B4 | X |
| Mobil 1 Extended Life 10W-60 has the following builder approvals: | |
| VW 501 01 / 505 00 | X |
| MB-Approval 229.1 | X |
| According to ExxonMobil, Mobil 1 Extended Life 10W-60 is of the following quality level | 10W-60 |
| API CF | X |
Typical Properties
| Mobil 1 Extended Life 10W-60 | |
| Viscosity, cSt (ASTM D445) | |
| @ 40º C | 152.7 |
| @ 100º C | 22.7 |
| Viscosity Index | 178 |
| Sulfated Ash, wt% (ASTM D874) | 1.4 |
| Phosphorous, wt% (ASTM D4951) | 0.13 |
| Flash Point, ºC (ASTM D92) | 234 |
| Density @15.6 ºC g/ml (ASTM D4052) | 0.86 |
| Total Base Number (ASTM D2896) | 11.8 |
| MRV at -30 ºC, cP (ASTM D4684) | 25,762 |
| HTHS Viscosity, mPa•s @ 150 ºC (ASTM D4683) | 5.7 |
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet, or will be provided by seller to customers if and as legally required. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
Mobil , Mobil 1 and the Pegasus designare trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
05-2020