Mobil ATF™ 3309
Mobil passenger-vehicle-lube , United Kingdom
Product Description
Mobil ATF™ 3309 is an exceptionally high performance lubricant that meets original equipment manufacturers' specifications for use in certain slip-controlled lock-up automatic transmissions.
Features and Benefits
The unique formulation of Mobil ATF 3309 is designed to provide excellent lubrication of transmissions in specified slip-controlled lock-up automatic transmissions. These outstanding performance capabilities translate into significant operational benefits, including:
• Excellent lubricating characteristics for quiet operation and smooth shifting in approved transmissions
• Controlled friction properties for smooth and efficient transmission of power across all normal temperature ranges
• Helps to control transmission shudder and provide excellent vehicle driveability
• Helps to extend transmission life based on excellent wear control
• Long fluid life based on excellent oxidation resistance
• Excellent viscosity stability (high viscosity index) to help assure adequate lubrication without excessive thinning in severe high-temperature service or thickening at low starting temperatures
• Resistance to foaming
• Superb protection against rusting and corrosion
• Compatibility with synthetic rubber seal materials
Applications
Mobil ATF 3309 is recommended for use in transmissions requiring fluids of JWS 3309 or GM 9986195 quality levels. It is also recommended for service fill applications where Toyota T-IV or T4, T-III or T3 are called for. Please refer to the owners' manual for proper fluid requirements.
Specifications and Approvals
This product is recommended for use in applications requiring: |
AUDI G-055-025-A2 |
GM 9986195 |
TOYOTA* T-IV |
This product meets or exceeds the requirements of: |
FORD WSS-M2C924-A |
Properties and Specifications
Property |
|
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 |
13000 |
Color, Visual |
Red |
Density @ 15 C, g/cm3, ASTM D4052 |
0.852 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
>185 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
7.1 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
33 |
Pour Point, °C, ASTM D97 |
‹ -45 |
Viscosity Index, ASTM D2270 |
181 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2024