Mobil ATF™ 320
Mobil passenger-vehicle-lube , France
Product Description
Mobil ATF 320 is an extra high performance automatic transmission fluid.
Mobil ATF 320 is recommended for most passenger car and commercial automatic transmissions. It is also suitable for power steering systems, hydraulic applications and some manual transmissions where an automatic transmission fluid is specified.
Features and Benefits
• The correct frictional requirements to give smooth transmission operation over wide operational bands
• Protection against degradation at high operating temperature and extended service
• Low temperature pumpability and circulation ensuring cold start performance
• Compatibility with all conventional seal materials found in transmission units
Applications
Mobil ATF 320 is recommended for most passenger car and commercial automatic transmissions. It is also suitable for power steering systems, hydraulic applications and some manual transmissions where an automatic transmission fluid is specified.
Specifications and Approvals
This product has the following approvals: |
MAN 339 Typ Z1 |
MAN 339 Typ V1 |
Voith Turbo H55.6335.xx |
ZF TE-ML 14A |
ZF TE-ML 04D |
ZF TE-ML 17C |
ZF TE-ML 03D |
VOLVO 97341 |
MAN 339 Typ L1 |
This product is recommended for use in applications requiring: |
Allison C-4 |
Ford MERCON |
GM DEXRON IIiG |
This product meets or exceeds the requirements of: |
R. Bosch AS TE-ML 09 |
Properties and Specifications
Property |
|
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 |
17900 |
Density @ 15 C, g/ml, ASTM D4052 |
0.856 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
220 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
7.6 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
05-2024