Mobil 1™ ESP 0W-30
Mobil passenger-vehicle-lube , France
Product Description
Mobil 1™ ESP 0W-30 is an advanced full synthetic engine oil designed to help provide exceptional cleaning power, wear protection and overall performance. Mobil 1™ ESP 0W-30 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in both diesel and gasoline powered automobiles. Mobil 1™ ESP 0W-30 meets or exceeds the requirements of many leading industry and car manufacturers' standards required for newer modern diesel and gasoline powered passenger car engines.
Features and Benefits
Mobil 1™ ESP 0W-30 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters (CAT's). Mobil 1™ ESP 0W-30 has been designed to help deliver outstanding performance and protection in conjunction with potential fuel economy benefits. Key features and potential benefits include:
|
Features |
Advantages and Potential Benefits |
|
Low Ash Content |
Helps to reduce particulate build up in Diesel Particulate Filters |
|
Low Sulfur and Phosphorous content |
Helps to reduce poisoning of Gasoline Catalytic Converters |
|
Active cleaning agents |
Helps to reduce deposits and sludge build-up to enable long and clean engine life |
|
Outstanding thermal and oxidation stability |
Helps to reduce oil aging allowing extended drain interval protection |
|
Low oil consumption |
Less hydrocarbon pollution |
|
Enhanced frictional properties |
Potentially aids fuel economy |
|
Excellent low temperature capabilities |
Quick cold weather starting and ultra-fast protection helps to extend engine life |
Applications
Mobil 1™ ESP 0W-30 carries recommendations for a wide range of passenger cars, SUVs and light vans. It is designed for modern high efficiency gasoline, diesel and hybrid cars from Porsche, Volkswagen and Mercedes-Benz as well as for Japanese and Korean vehicles that specifically call for a SAE 0W-30 viscosity grade and any of the specifications the oil supports.
• Mobil 1™ ESP 0W-30 based on Mobil low-ash synthetic technology, meets or exceeds ACEA C3 industry standard to help protect exhaust gas after-treatment systems designed to limit engine emissions. It also meets or exceeds API SP engine test requirements to help address LSPI (Low Speed Pre-Ignition), making it a preferred choice for downsized direct injection turbocharged gasoline engines.
• Mobil 1™ ESP 0W-30 is especially suitable for extreme conditions, where conventional oil often may not perform. In particular, it can help cold engine protection and start-up in applications calling for the same specification in the 5W-30 grade.
• Mobil 1™ ESP 0W-30 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Owner's manual should be consulted for recommended viscosity grade and specification.
Specifications and Approvals
|
This product has the following approvals: |
|
MB-Approval 229.31 |
|
MB-Approval 229.51 |
|
MB-Approval 229.52 |
|
Porsche C30 |
|
VW 504 00 |
|
VW 507 00 |
|
This product is recommended for use in applications requiring: |
|
Recommended by ExxonMobil for applications requiring ACEA C2 |
|
This product meets or exceeds the requirements of: |
|
API SL |
|
ACEA C3 |
|
API SN Engine Test Requirements |
|
API SN PLUS ENGINE TEST REQUIREMENTS |
|
API SP ENGINE TEST REQUIREMENTS |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 0W-30 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
64.8 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
12.2 |
|
Density @ 15.6 C, g/ml, ASTM D4052 |
0.846 |
|
Pour Point, °C, ASTM D97 |
-51 |
|
Flash Point, °C, ASTM D92 |
230 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
10-2024