Mobil Delvac Ultra™ SCA 75W-90
Mobil commercial-vehicle-lube , France
Product Description
Mobil Delvac Ultra SCA 75W-90 is an Automotive Gear lubricant engineered to meet very demanding extended drain and warranty requirements. It is designed for use in heavy-duty drivetrains that require gear lubricants with excellent load-carrying capability and where extreme pressures and shock loading are expected. Mobil Delvac Ultra SCA 75W-90 incorporates Advanced synthetic technology basestock and advanced additives providing significant advantages over conventional gear oils. Mobil Delvac Ultra™ SCA 75W-90 is designed for gearboxes in Scania and MAN heavy duty trucks.
The state-of-the-art technology in Mobil Delvac Ultra SCA 75W-90 delivers excellent performance, helps to protect against thermal degradation and oxidation, contributes to reduced wear and corrosion, improved shear stability and extended service capability.
Features and Benefits
Today's technology has vastly improved the performance capabilities of heavy-duty on highway equipment load, torque, speed, and control through innovative drivetrain designs. These designs have changed and increased the requirements of lubricants to deliver this higher level of performance, increase productivity, and reduce operating costs. Friction control, wear protection, thermal stability, shear stability, rust and corrosion prevention and seal protection are features that must be optimally balanced to contribute to extended gear and seal life, smooth operation, improved fuel economy potential and high load high torque capability for this type of application.
The key benefits of Mobil Delvac Ultra SCA 75W-90 include:
Features |
Advantages and Potential Benefits |
Exceptional thermal stability and resistance to high temperature oxidation |
Long gear and bearing life due to minimal deposits |
|
Long seal life |
Outstanding protection against low speed/high torque wear and high speed scoring |
Increased load-carrying capability |
|
Helps to reduce maintenance costs and long equipment life |
Good shear stability |
Helps to retain viscosity and film strength under severe operating conditions to prevent wear |
Proven friction reduction properties |
Has potential for fuel economy and reduce operating costs |
Good low temperature fluidity versus conventional oils |
Helps to reduce wear and ease of start-up |
Good resistance to foaming |
Helps to maintain film strength for reliable lubrication |
Compatible with typical automotive seals and gaskets |
Minimum leakage and reduced contamination |
Applications
• Transmission oil designed for Scania and MAN gearboxes in heavy duty trucks where Scania STO 2:0 G or MAN 341 type GA2 is requested
• On-highway heavy duty trucks
• Recommended where extended service intervals and warranties are required
• Not intended for automatic, manual or semiautomatic transmissions for which engine oil or automatic transmission fluids are recommended
Specifications and Approvals
This product has the following approvals: |
MAN 341 Type GA2 |
This product meets or exceeds the requirements of: |
Scania STO 2:0 G |
Properties and Specifications
Property |
|
Grade |
SAE 75W-90 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
200 |
Pour Point, °C, ASTM D97 |
-40 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
98 |
Density @ 15.6 C, kg/l, ASTM D4052 |
0.89 |
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 |
140000 |
Viscosity Index, ASTM D2270 |
175 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
16.7 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
06-2024