Mobil Delvac™ Super 1400E 15W-40
Mobil commercial-vehicle-lube , Faroe Islands
Product Description
Mobil Delvac™ Super 1400E 15W-40 is a high performance diesel engine oil that provides protection for diesel engines operating under severe service conditions for both on- and off-highway applications. Mobil Delvac Super 1400E 15W-40 is recommended by ExxonMobil for use in a wide range of heavy-duty applications and operating environments found in the trucking, mining, construction, quarrying, and agricultural industries
Features and Benefits
Thermal and oxidation stability Helps to control sludge build-up and deposits
TBN reserve Helps to control deposits
Stay-in-grade shear stability Helps to reduce oil consumption and to provide wear protection
Excellent detergency/ dispersancy Helps to protect and to maintain engines clean
Component compatibility Long gasket and seal life
|
Features |
Advantages and Potential Benefits |
|
Thermal and oxidation stability |
Helps to control sludge build-up and deposits |
|
TBN reserve |
Helps to control deposits |
|
Stay-in-grade shear stability |
Helps to reduce oil consumption and to provide wear protection |
|
Excellent detergency/ dispersancy |
Helps to protect and to maintain engines clean |
|
Component compatibility |
Long gasket and seal life |
Applications
Recommended by ExxonMobil for use in:
• Naturally aspirated and turbo-charged diesel powered equipment of European, Japanese, and American manufacturers in line with owner manual recommendations
• On-highway light and heavy-duty trucking
• Off-highway industries including: construction, mining, quarrying, and agriculture
Specifications and Approvals
|
This product has the following builder approvals: |
|
MTU Oil Category 1 |
|
This product is recommended by ExxonMobil for use in applications requiring: |
|
RENAULT TRUCKS RD |
|
RENAULT TRUCKS RD-2 |
|
VOLVO VDS-2 |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 15W-40 |
|
Ash, Sulfated, mass%, ASTM D874 |
1.1 |
|
Flash Point, °C, ASTM D92 |
230 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
14.5 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
106 |
|
Pour Point, °C, ASTM D97 |
-27 |
|
Total Base Number, mgKOH/g, ASTM D2896 |
9.7 |
|
Viscosity Index, ASTM D2270 |
140 |
|
Specific Gravity, 15 C/15 C, ASTM D4052 |
0.881 |
|
Cold-Cranking Simulator, Apparent Viscosity @ -20 C, mPa.s, ASTM D5293 |
6150 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
09-2024