Mobil Super™ 3000 0W-16
Mobil passenger-vehicle-lube , Finland
Product Description
Mobil Super™ 3000 0W-16 is an ultra-low viscosity, fully synthetic engine oil developed to help improve engine efficiency and provide outstanding wear protection in highly efficient, internal combustion and hybrid vehicles.
Mobil Super 3000 0W-16 addresses emerging engine technology where vehicle manufacturers strive to optimise fuel economy. It is the oil of choice for select gasoline and hybrid engines from Honda, Lexus and Toyota which are designed to operate at their optimum with 0W-16 oils.
Features and Benefits
Mobil Super 3000 0W-16 is designed to help provide long engine life and outstanding protection against sludge, engine rust and corrosion under severe operating conditions and provide optimum viscosity and fluidity across a broad range of temperatures.
• Designed for modern and highly efficient gasoline and hybrid engines
• Meets or exceeds latest ILSAC and API industry standards
• Protects against low-speed pre-ignition for gasoline engines with direct injection and turbocharging
• Outstanding wear protection, helps extend engine life
• Permits operation at elevated temperatures without oxidative oil thickening and oil breakdown
• Allows easy cold-weather starting and reduced engine warm-up time to protect critical engine parts
Applications
Mobil Super 3000 0W-16 is suitable for modern high efficiency gasoline hybrid cars from Japanese and Korean manufacturers that specifically call for a SAE 0W-16 viscosity grade and any of the specifications the oil supports.
• Mobil Super 3000 0W-16 meets or exceeds the American Petroleum Institute's latest 'SP Resource Conserving' requirements and the novel ILSAC GF-6B category for low viscosity oils, which qualifies the oil to help address LSPI (Low Speed Pre-Ignition) in downsized direct injection turbocharged gasoline engines, and also to contribute to engine fuel efficiency.
• ILSAC GF-6B category, contrary to GF-6A category, is not backward compatible with previous ILSAC categories (GF-1 through GF-5) therefore Mobil Super 3000 0W-16 should be used only when a 0W-16 spec is recommended in the owner's manual.
Owner's manual should be consulted for recommended viscosity grade and specification.
Specifications and Approvals
This product meets or exceeds the requirements of: |
API SP |
ILSAC GF-6B |
API SN |
API SN PLUS |
API SN PLUS RESOURCE CONSERVING |
API SN Resource Conserving |
API SP Resource Conserving |
Properties and Specifications
Property |
|
Grade |
SAE 0W-16 |
Density @ 15 C, g/ml, ASTM D1298 |
0.831 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
238 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
7.3 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
38.2 |
Pour Point, °C, ASTM D97 |
-54 |
Viscosity Index, ASTM D2270 |
160 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
07-2023