Mobil 1™ ESP x2 0W-20
Mobil passenger-vehicle-lube , Finland
Product Description
Mobil 1™ ESP x2 0W-20 is an advanced fully synthetic engine oil specifically designed to provide outstanding engine cleanliness, wear protection, strong durability and advanced fuel economy* to keep your engine running like new. Mobil 1™ ESP x2 0W-20 is our latest technology combining durability and protection with a low viscosity, low friction engine oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs). Mobil 1™ ESP x2 0W-20 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered European vehicles that require SAE 0W-20 viscosity grades.
* compared vs Mobil 1 ESP 5W-30.
Features and Benefits
|
Features |
Advantages and Potential Benefits |
|
Active cleaning agents |
Helps to prevent the buildup of harmful deposits to enable long and clean engine life**
Provides outstanding engine cleanliness and sludge control |
|
|
**Compared to vehicle manufacturer standard |
|
Outstanding thermal and oxidation stability |
Helps to reduce oil aging allowing extended drain interval protection |
|
Enhanced frictional properties |
Provides up to 4% fuel economy improvement when changing from a higher viscosity 5W-30 engine oil*** |
|
|
***Actual savings are dependent upon vehicle and engine type, outside temperature and barometric pressure, driving conditions and your current engine oil viscosity. |
|
Excellent low temperature capabilities |
Quick cold weather performance to help provide fast protection at start-up |
|
Outstanding high temperature capabilities |
Provided outstanding high temperature protection over the entire oil drain interval** |
|
|
**Compared to vehicle manufacturer standard |
|
Wear protection |
Provides outstanding wear protection over the full oil drain interval** |
|
|
**Compared to vehicle manufacturer standard |
Applications
Mobil 1 ESP x2 0W-20 is recommended for the new high-performance gasoline, diesel and hybrid engines found in emerging European vehicles that require SAE 0W-20 viscosity grades.
• Mobil 1 ESP x2 0W-20 can only be used in the vehicles for which it is approved. It is not backward compatible with older vehicle engines.
• Mobil 1 ESP x2 0W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
**** Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications
Specifications and Approvals
|
This product has the following approvals: |
|
GM dexosD Licensed |
|
MB-Approval 229.71 |
|
Porsche C20 |
|
VW 508 00 |
|
VW 509 00 |
|
This product meets or exceeds the requirements of: |
|
API SL |
|
ACEA C5 |
|
ACEA C6 |
|
API SN Engine Test Requirements |
|
API SP ENGINE TEST REQUIREMENTS |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 0W-20 |
|
Viscosity Index, ASTM D2270 |
180 |
|
Density, 15.6C, g/cm3, ASTM D4052 |
0.842 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
8.0 |
|
Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683 |
2.6 |
|
Ash, Sulfated, mass%, ASTM D874 |
0.8 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
230 |
|
Pour Point, °C, ASTM D97 |
-60 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
07-2024