Mobil™ Brake Fluid DOT 4

Mobil passenger-vehicle-lube , Spain

Extra High Performance Hydraulic Brake Fluid

Product Description

Mobil Brake Fluid DOT 4 is an extra high performance hydraulic brake fluid for use in automotive disc, drum and anti-skid brake systems and clutch systems.

 

Features and Benefits

Mobil Brake Fluid DOT 4 is based on polyethylene glycol ether technology to provide the highest level of brake and clutch performance in modern as well as older model automotive and commercial vehicles. Key features and benefits include:

 

Features

Advantages and Potential Benefits

High boiling point

Consistent and safe brake performance under severe braking pressure

Minimum rubber component swell

Reduces leakage and loss of fluid to a minimum

Excellent corrosion protection

Extended life and reliability of brake system components

 

Applications

Mobil Brake Fluid DOT 4 is recommended by ExxonMobil for use in applications requiring disc, drum and anti-skid braking systems used in average to high performance vehicles requiring DOT 3 or DOT 4 level performance. Recommendations for use include:

     •  Use only in its concentrated form out of a previously unopened or well sealed container

     •  Always seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this will reduce service life significantly.

     •  Never reuse drained brake fluid.

     •  Brake fluid can affect the vehicle paintwork, so remove spills immediately without rubbing.

     •  Brake fluid should be drained from the vehicle every two years or 40,000 Km (24,000 Miles) and refilled.

     •  Check Owners Operators Manual for details.

 

Specifications and Approvals

This product meets or exceeds the requirements of the following industry specification:

FMVSS 116 DOT 3

FMVSS 116 DOT 4

ISO 4925:2005 Class 3

ISO 4925:2005 Class 4

SAE J1704

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

08-2023

ExxonMobil Lubricants and Specialties Europe division of ExxonMobil Petroleum & Chemical b.v.b.a.
Polderdijkweg
B-2030 Antwerpen, Belgium 

http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.