Mobil Delvac 1300 Series
Mobil commercial-vehicle-lube , Costa Rica
Product Description
Mobil Delvac 1310, 1320, 1330, 1340, and 1350 are high performance monograde diesel engine oils formulated from advanced technology base oils and a balanced additive system. They are specifically engineered for performance in intercooled, turbo-charged engines operating under severe on and off-highway conditions. Mobil Delvac 1300 monogrades are used in a wide range of applications where a monograde lubricant is recommended.
Features and Benefits
|
Features |
Advantages and Potential Benefits |
|
Excellent protection against oil thickening, high temperature deposits, sludge build-up, oil degradation and corrosion |
Prolonged engine life Less wear Excellent protection against ring sticking |
|
Extended TBN reserve |
Long-term deposit/wear control Controls formation of acids when using higher sulfur fuels |
Applications
Recommended by ExxonMobil for use in:
• Naturally aspirated and turbo-charged diesel powered equipment
• On highway light and heavy duty trucking
• Off highway industries including: construction, mining, quarrying, and agriculture
• Hydraulic system and wet breaks in mobile equipment where a SAE 20 diesel engine oil is required (Delvac 1320)
Specifications and Approvals
|
Mobil Delvac 1300 are also recommended by ExxonMobil for use in applications requiring: |
MOBIL DELVAC 1320 |
MOBIL DELVAC 1330 |
MOBIL DELVAC 1340 |
MOBIL DELVAC 1350 |
|
API CF |
X |
X |
X |
X |
|
API SF |
X |
X |
X |
X |
|
MB 227.0 |
X |
Properties and Specifications
|
Property |
MOBIL DELVAC 1320 |
MOBIL DELVAC 1330 |
MOBIL DELVAC 1340 |
MOBIL DELVAC 1350 |
|
Grade |
SAE 20 |
SAE 30 |
SAE 40 |
SAE 50 |
|
Ash, Sulfated, mass%, ASTM D874 |
1.1 |
1.1 |
1.1 |
1.1 |
|
Density @ 15 C, g/ml, ASTM D4052 |
0.887 |
0.89 |
0.897 |
0.902 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
232 |
256 |
254 |
260 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
8.4 |
11.8 |
14.6 |
19.9 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
61 |
106 |
136 |
232 |
|
Pour Point, °C, ASTM D97 |
-21 |
-21 |
-30 |
-18 |
|
Total Base Number, mgKOH/g, ASTM D2896 |
10 |
10 |
10 |
10 |
|
Viscosity Index, ASTM D2270 |
108 |
99 |
99 |
99 |
Health and Safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
11-2020