Mobil EV Cool Drive Elite 311

Mobil passenger-vehicle-lube , 中国

Integrated Electric Motor / Reduction Gearbox Fluid

Product Description

Mobil EV Cool Drive Elite 311 is a full synthetic, high performance, high efficiency fluid for electric vehicle transmission with oil-cooled e-motor integrated with reduction gearbox. Its advanced formulation and combining optimum lubrication characteristics and heat transfer capabilities for use in electric powertrain applications, with outstanding material compatibility and oxidation, balanced performance in electric and wear protection.

Features and Benefits

Features	Advantages and Potential Benefits
Further	Maintains excellent viscosity control over a wide range of temperatures, reducing viscous drag, which in turn helps vehicles go further between charges.
Longer	Helps prolong the life of your electrified vehicles, protecting components from wear, while helping prevent your electric motor from overheating. Helps extend the life of your gears/gearbox, bearings & electric motor.
Safer	Helps keep your vehicles and components running safely. Designed to be compatible with conductive and insulating materials.

Applications

•Excellent gear and bearing protection, superior anti wear and extreme pressure performance against instantaneous torque during accelerating with minimal micro-pitting and material harms.

• Superior Electric Performance. Good material compatibility and oxidation – copper, steel and seals performance.

• Extended fluid life through superior corrosion protection and thermal-oxidative stability against sludge and deposit formation, to maintain system cleanliness.

• Superior anti-foam performance that brings outstanding component protection by reducing and eliminating potential of cavitation.

• Excellent cooling performance that greatly dissipate heat from e-motor to lower component temperature, and allows for higher power output.

Properties and Specifications

Property
Grade	N/A
Pour Point, °C, ASTM D97	＜-57
Appearance, AMS 1738	C&B
Copper Strip Corrosion, 3 h, 150 C, Rating, ASTM D130	1b
ASTM Color, ASTM D1500	L1.0
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445	5.1
Flash Point, Cleveland Open Cup, °C, ASTM D92	224
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983	5136
Density @ 15.6 C, g/ml, ASTM D4052	0.825
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445	23.58
FZG A/10/16.6R/90 Load Carrying Capability, FLS, CEC L-084-02	9

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

12-2024

ExxonMobil (China) Investment Co. Ltd
17th Floor, Metro Tower
30 Tian Yao Qiao Road
Shanghai 2000030
China

+86 21 24076000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.