Mobil EV™ Cool Drive 308
Mobil passenger-vehicle-lube , 中国
Product Description
Mobil EV Cool Drive 308 is a full synthetic, high performance, high efficiency fluid for electric vehicle transmission with oil-cooled e-motor integrated with reduction gearbox. Its advanced formulation and combining optimum lubrication characteristics and heat transfer capabilities for use in electric powertrain applications, where thermal management and compatibility with electrical components is equally important as lubrication of critical parts in motion. Outstanding copper and e-motor material compatibility, good gear protection and oxidation performance. Suitable for high voltage EV architecture.
Features and Benefits
Advantages offered by Mobil EV Cool Drive 308:
• High volume resistivity helps minimize the risk of electric short circuits, static discharge, and allows for direct contact with electrical components
• Extended fluid life through superior thermal-oxidative stability and outstanding resistance against sludge and deposit formation
• Excellent corrosion protection and thermal-oxidative stability to maintain system cleanliness over equipment life
• Outstanding copper and e-motor material compatibility ensure the electrical safety of high voltage EV architecture.
• Superior anti-foam performance that brings outstanding component protection by reducing and eliminating potential of cavitation.
• Excellent cooling performance that greatly dissipate heat from e-motor to lower component temperature, and allows for higher power output.
Further
Maintains excellent viscosity control over a wide range of temperatures, reducing viscous drag, which in turn helps vehicles go further between charges.
Longer
Helps prolong the life of your electrified vehicles, protecting components from wear, while helping prevent your electric motor from overheating. Helps extend the life of your gears/gearbox, bearings & electric motor.
Safer
Helps keep your vehicles and components running safely. Designed to be compatible with conductive and insulating materials.
Applications
Mobil EV Cool Drive 308 is a full synthetic, high performance, high efficiency fluid for electric vehicle transmission with oil-cooled e-motor integrated with reduction gearbox, balancing lubrication performance with cooling properties for electric components.
Properties and Specifications
|
Property |
|
|
Density @ 15.6 C, g/ml, ASTM D4052 |
0.8439 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
208 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
22.43 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
5.03 |
|
Viscosity Index, ASTM D2270 |
159 |
|
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 |
5072 |
|
Pour Point, °C, ASTM D97 |
-51 |
|
Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130 |
1a |
|
FZG A/10/16.6R/90 Load Carrying Capability, FLS, CEC L-084-02 |
8 |
|
Dielectric Breakdown, 60 Hz, VDE Electrodes, 0.04", kV, ASTM D1816 |
77.8 |
|
Copper Strip Corrosion, 168hrs, 150C, Rating, ASTM D130 |
1B |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
12-2024