Mobil 1™ 0W-8
Mobil passenger-vehicle-lube , 中国
Product Description
Keep your engine running at peak efficiency while improving fuel economy. Engineered for today's advanced and hybrid engines, Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-8 helps to improve fuel economy and extend engine life for vehicles of all ages. Mobil 1 0W-8 helps to prevent deposits and sludge buildup to keep your engine running like new*. Mobil 1 Advanced Fuel Economy meets JASO GLV-1 and API SP Resource Conserving industrial standards.
* Based on the MADS test result in US in 2022-2023
Features and Benefits
1. Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-8 is low-viscosity to help improve fuel economy.
2. Help to prevent deposits and sludge buildup to keep your engine running like new keep your engine running like new*.
* Based on the MADS test result in US in 2022-2023.
Applications
Mobil 1™ 0W-8 is recommended by ExxonMobil for SAE 0W-8 applications in gasoline and hybrid engines designed to operate on SAE 0W-8 viscosity motor oil.
• Mobil 1 0W-8 is engineered for use in select Toyota gasoline and other hybrid engines where this viscosity is recommended.
• Mobil 1 0W-8 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
* Always check your owner's manual for the manufacturer's recommended oil viscosity grade, API service classification and any builder approval.
Specifications and Approvals
This product meets or exceeds the requirements of: |
API SP Resource Conserving |
JASO GLV-1 |
Properties and Specifications
Property |
|
Grade |
SAE 0W |
Pour Point, °C, ASTM D97 |
<-60 |
Total Base Number, mgKOH/g, ASTM D2896 |
9 |
Ash, Sulfated, mass%, ASTM D874 |
0.8 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
232 |
Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684 |
<5000 |
Viscosity Index, ASTM D2270 |
144 |
Density @ 15.6 C, g/ml, ASTM D4052 |
0.842 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
5 |
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
1.86 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
23 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
02-2024