Mobilcut™ 323
Mobil industrial , 中国
Product Description
Mobilcut is the trademark for Mobil Industrial lubricants line of high performance water miscible metal removal fluids. Formulated with leading edge base oils, additives, and emulsifiers, the Mobilcut series of non-chlorinated products provides dependable performance in a wide array of metal removal processes. The products are designed to work in a variety of hard and soft water qualities and offer extremely low foam potential and long-term corrosion protection for machine and components. Low maintenance and inherently stable, Mobilcut products are designed for the modern machine shop where long service life, excellent machining performance, health and environmental concerns are important factors for increased productivity. These products are supplied in concentrated form and require mixing with water at the point of use. Mobilcut 323 is free of formaldehyde release agents (FAD).
Mobilcut 323 is boron free high quality synthetic water miscible metalworking fluid designed for general grinding operations with steel and cast iron where a high quality surface finish, outstanding cooling and low foaming potential are the primary requirements.
Features and Benefits
The Mobilcut 323 is designed to help increase the productivity of modern machine shops by providing high performance features
|
Features |
Advantages and Potential Benefits |
|
Form stable emulsions and solutions |
Ease of use and maintenance |
|
Long term inherent stability |
Increases batch life and reduces unpleasant odors |
|
Long term inherent stability |
Increases batch life and reduces unpleasant odors |
|
Low foaming potential |
Improved performance even in high pressure systems |
|
Resists formation of sticky residues |
Improves machine cleanliness |
|
High degree of corrosion protection |
Reduces machine maintenance and rework of materials |
|
Good separability from fines |
Improves filterability and surface finish |
|
Wide Range of applicability |
Potential to consolidate products and reduce inventories |
Applications
Mobilcut 323 is synthetic fluid, primarily recommended for grinding of steels and cast iron. Fluid type is a chemical solution. Water hardness range is from 0 to 500 ppm. Its refractometer factor is 1.9
Recommended concentrations for typical operations:
Low alloy steels grinding: 5-6%
Carbon alloy steels grinding: 6-8%
Cylindrical & Surface grinding: 5-8%
Properties and Specifications
|
Property |
|
|
Refractive Index 20 C (concentrate), -, ASTM D1218 |
1.409 |
|
Kinematic viscosity 20 C (concentrate), mm2/s, DIN EN ISO 3104 |
7.5 |
|
pH (emulsion) (5% in 360 ppm hardness water), -, DIN 51369 |
9.1 |
|
Anti-corrosion properties (emulsion) (5% in 360 ppm hardness water), -, DIN 51360-2 |
0/0 |
|
Emulsion stability (5% in 360 ppm hardness water), -, AA.Lab.102 |
clear solution, no separation |
|
Density 15 C (concentrate), kg/m3, DIN 51757 |
1099 |
|
Appearance (concentrate), -, AA.Lab.101 |
Clear Liquid |
|
Refractive index factor (5% in 360 ppm hardness water), %, AA.Lab.105 |
1.9 |
|
Foaming behavior (5% in 360 ppm hardness water), sec/ml, AA.Lab.103 |
35/0 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
08-2020