Mobilcut™ 141
Mobil industrial , 中国
Product Description
Mobilcut™ is the trademark for Mobil Industrial lubricants line of high performance water miscible metal removal fluids. Formulated with leading edge base oils, additives, and emulsifiers, the Mobilcut series of non-chlorinated products provides dependable performance in a wide array of metal removal processes. The products are designed to work in a variety of hard and soft water qualities and offer low foam potential and long-term corrosion protection for machine and components. Low maintenance and inherently stable, Mobilcut products are designed for the modern machine shop where long service life, excellent machining performance, health and environmental concerns are important factors for increased productivity. These products are supplied in concentrated form and require mixing with water at the point of use. Mobilcut 141 is free of formaldehyde release agents (FAD).
Mobilcut 141 is a long life water soluble fluid making it an ideal choice for moderate duty machining applications in the modern machine shop. It is formulated to provide long service life, good emulsion stability and durability while helping to increase tool life and surface finish. Mobilcut 141 is an ideal choice where excellent machining performance is required for a wide variety of materials and applications while being easy to monitor and maintain. It forms a stable emulsion which is suitable for hard and soft water in the range from 50 ppm to 500 ppm.
Features and Benefits
The Mobilcut 141 is designed to help increase the productivity of modern machine shops by providing high performance features
|
Features |
Advantages and Potential Benefits |
|
Form stable emulsions and solutions |
Ease of use and maintenance |
|
Long term inherent stability |
Increases batch life and reduces unpleasant odors |
|
Low foaming potential |
Improved performance even in high pressure systems |
|
Resists formation of sticky residues |
Improves machine cleanliness |
|
High degree of corrosion protection |
Reduces machine maintenance and rework of materials |
|
Good separability from fines |
Improves filterability and surface finish |
|
Wide Range of applicability |
Potential to consolidate products and reduce inventories |
Applications
Mobilcut 141: Machining of industrial grade aluminum and high machinability steels in moderate duty operations such as milling, turning, sawing, boring, drilling and reaming where the lubricity of a soluble oil is desired.
Fluid type is micro emulsion. Mineral oil content is typically 35%. Water hardness range is from 50 to 500 ppm. Its refractometer factor is 1.3.
Recommended concentrations for typical operations:
Low alloy steels - milling, turning: 5-8%
Carbon alloy steels, difficult machining: 6-10%
Industrial grade Aluminum machining: 6-10%
Cylindrical & Surface grinding: 5-7%
Properties and Specifications
|
Property |
|
|
Appearance (concentrate), -, AA.Lab.101 |
yellow, slightly turbid, liquid |
|
Density 15 C (concentrate), kg/m3, DIN 51757 |
991 |
|
Refractive Index 20 C (concentrate), -, ASTM D1218 |
1.4531 |
|
Kinematic viscosity 20 C (concentrate), mm2/s, DIN EN ISO 3104 |
140 |
|
pH (emulsion) (5% in 360 ppm hardness water), -, DIN 51369 |
9.1 |
|
Anti-corrosion properties (emulsion) (5% in 360 ppm hardness water), -, DIN 51360-2 |
0/0 |
|
Emulsion stability (5% in 360 ppm hardness water), -, AA.Lab.102 |
translucent, no cream, no oil |
|
Foaming behavior (5% in 360 ppm hardness water), sec/ml, AA.Lab.103 |
7/0 |
|
Refractive index factor (5% in 360 ppm hardness water), %, AA.Lab.105 |
1.3 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
08-2020