Mobil 1 Racing™ 0W-30

Mobil passenger-vehicle-lube , Canada

Advanced Full Synthetic Motor Oil

Product Description

Mobil 1™ Racing 0W-30 is an advanced full synthetic motor oil designed specifically for racing engines and is not recommended for street use. This high performance, fully synthetic formula is specially balanced for friction reduction and optimum horsepower with outstanding wear protection.

Features and Benefits

Mobil 1 Racing 0W-30 is a proprietary formulation of low viscosity synthetic base oils fortified with a precisely balanced component-blended additive system featuring high levels of anti-wear and friction reducing additives. This advanced protection is engineered to help deliver optimum horsepower with outstanding wear protection. Key features and potential benefits include:

• Boosted levels of anti-wear protection -- well beyond those of ordinary automotive oils -- to help protect engines even during grueling racing applications.

• Helps to maximize power output by reducing internal friction.

• Outstanding shear stability and a robust additive package reduce oil breakdown and help to extend engine life, even under some of the most extreme conditions.

• Compared to conventional racing oils and higher-viscosity synthetic motor oils, Mobil 1 Racing 0W-30 provides faster flow to critical engine parts at low temperatures.

• Helps to deliver exceptional high-temperature protection, even at temperatures in excess of 400 degrees F (204 C).

Applications

• Mobil 1 Racing 0W-30 is recommended by Imperial Oil for a wide range of race engine applications including highly loaded flat tappet designs such as NASCAR Cup engines.

• Mobil 1 Racing 0W-30 is designed for use by professional, amateur and weekend racers.

• Mobil 1 Racing 0W-30 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

(Note: Mobil 1 Racing 0W-30 is not recommended for street use)

Properties and Specifications

Property
Grade	SAE 0W-30
Ash, Sulfated, mass%, ASTM D874	1.2
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683	3.01
Density @ 15 C, g/cm3, ASTM D4052	0.8467
Pour Point, °C, ASTM D97	-57
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445	10.8
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445	58
Flash Point, °C, ASTM D92	216
Viscosity Index, ASTM D2270	179

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

06-2023

Imperial Oil

Petroleum and Chemicals Division
Lubricants and Specialties
240 Fourth Ave SW
C. P. 2480, Station M
Calgary AB T2P 3 M 9

1-800-268-3183

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local Imperial Oil contact or visit www.imperialoil.ca
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Imperial Oil, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.