Mobil Delvac Modern™ Transmission Fluid 80W
Mobil commercial-vehicle-lube , Bolivia
Product Description
Mobil Delvac Modern™ Transmission Fluid 80W is an automotive gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for commercial transmissions, axles, and final drives where protection against wear and scoring is required. It is recommended by ExxonMobil for use in applications where API GL-4 service is required.
Features and Benefits
Today's drivetrain applications place higher performance demands on lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and optimise operating costs. Longer service intervals place additional demands on the gear lubricant requiring effective basestock and additive systems. Mobil Delvac Modern™ Transmission Fluid 80W is engineered to meet these challenges. The key benefits include:
|
Features |
Advantages and Potential Benefits |
|
Good thermal stability and resistance to high temperature oxidation |
Long gear and bearing life due to minimal depositsLong seal life |
|
Excellent rust and corrosion protection |
Long component life |
|
Good low temperature lubrication |
Reduced wear at start-up and ease of start-up |
|
Compatible with typical automotive seals and gaskets |
Minimum leakage and reduced contamination |
Applications
Recommended by ExxonMobil for use in:
• Manual transmissions and drive axles requiring API GL-4 level performance
• Manual transmissions and drive axles requiring a lubricant that meets R. Bosch AS (ZF) TE-ML 08 or MAN 341 Typ Z1
• Passenger cars, onhighway light and heavy-duty trucks and commercial vehicles
• Off-highway industries including construction, quarrying, and agriculture
• Other industrial, commercial, and automotive applications including hypoid gears operating under moderate to severe operating conditions
Properties and Specifications
|
Property |
|
|
Grade |
SAE 80W |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
10 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
216 |
|
Pour Point, °C, ASTM D97 |
-33 |
|
Density @ 15 C, kg/l, ASTM D4052 |
0.89 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
75.8 |
|
Viscosity Index, ASTM D2270 |
104 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
12-2024