Mobil Delvac™ Light Commercial Vehicle E 10W-40
Mobil commercial-vehicle-lube , Belgium
Product Description
Mobil Delvac™ Light Commercial Vehicle E 10W-40 is a semi-synthetic engine oil that provides long engine life and excellent engine protection against sludge & wear.
Mobil Delvac™ Light Commercial Vehicle E 10W-40 provides excellent lubrication of diesel and gasoline engines operating in severe driving conditions typically encountered in city operations. This product is recommended by ExxonMobil for European engines for use in a wide range of traditional light-duty commercial vehicles.
Features and Benefits
Mobil Delvac™ Light Commercial Vehicle E 10W-40 is formulated from high performance base oils and a superior balanced additive system to provide optimum engine performance in recent diesel and gasoline engines as well as older models. Key benefits include:
Features |
Advantages and Potential Benefits |
Increased thermal and oxidation stability |
Help to reduced sludge build-up, deposits, and long oil and engine life |
Enhanced wear protection |
Helps towards long component and engine life |
Advanced piston deposit control |
Helps to keep engines clean with reduced maintenance costs and long engine life |
Advanced soot handling to control viscosity increase, sludge build up, and filter pressure |
Helps to enhance engine protection for long engine life |
Enhanced low temperature pumpability |
Fast start up with reduced wear operating in low temperature climates |
Applications
ExxonMobil recommends Mobil Delvac™ Light Commercial Vehicle E 10W-40 for demanding driving conditions:
• Older engine technologies
• Gasoline and Diesel without Diesel Particulate Filters (DPF)
• Light trucks and vans
• Normal to occasionally severe operating conditions
Specifications and Approvals
This product has the following approvals: |
VW 501 01 |
VW 505 00 |
This product is recommended for use in applications requiring: |
MB-Approval 229.1 |
This product meets or exceeds the requirements of: |
API SN PLUS |
ACEA A3/B3 |
Properties and Specifications
Property |
|
Grade |
SAE 10W-40 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
234 |
Ash, Sulfated, mass%, ASTM D874 |
0.9 |
Cold-Cranking Simulator, Apparent Viscosity @ -25 C, mPa.s, ASTM D5293 |
5400 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
95 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
14.2 |
Density @ 15.6 C, g/ml, ASTM D4052 |
0.87 |
Total Base Number, mgKOH/g, ASTM D2896 |
9.9 |
Viscosity Index, ASTM D2270 |
155 |
Pour Point, °C, ASTM D97 |
-33 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
07-2020