Mobil Multi-Vehicle ATF

Mobil passenger-vehicle-lube , Barbados

Automatic Transmission Fluid

Product Description

Mobil Multi-Vehicle ATF is a premium synthetic blend lubricant formulated for use in a wide variety of North American, European, and Asian vehicles.

 

Features and Benefits

Advantages offered by Mobil Multi-Vehicle ATF over transmission fluids of lower quality are:

•  Long fluid life and long transmission life

•  Exceptional oxidation stability and resistance to chemical deterioration

•  Excellent flow properties at low start-up temperatures and high operating temperatures

•  Excellent lubricating characteristics for quiet operation, smooth shifting, and excellent wear protection

•  Excellent viscosity stability (high viscosity index) to help assure adequate lubrication without excessive thinning in severe high-temperature service or thickening at low starting temperatures

•  Dependable protection against rust and corrosion

 

Applications

Mobil Multi-Vehicle ATF is a premium lubricant for car and truck automatic transmissions and other applications & recommended by ExxonMobil for use in applications that require an automatic transmission fluid satisfying Ford Mercon and Mercon V performance levels.

 

Recommended by ExxonMobil for use in applications requiring Dexron III.

 

Good maintenance practice dictates that automatic transmissions be checked for proper fluid levels at regular intervals, and that the fluid be drained and replaced at intervals recommended by the manufacturer. Some manufacturers recommend more frequent changes of transmission fluid under severe driving conditions such as those that occur in heavy traffic, in hot weather, or when pulling a trailer.

 

Specifications and Approvals

This product is recommended for use in applications requiring:

Ford MERCON

GM DEXRON

GM DEXRON II

GM DEXRON IID

GM DEXRON IIE

GM DEXRON IIiG

GM DEXRON IIIH

JASO 1-A

VOLVO 97340

ALLISON C-4

 

This product meets or exceeds the requirements of:

Ford MERCON V

 

Properties and Specifications

Property

 

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

7.42

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

34.1

Viscosity Index, ASTM D2270

193

Flash Point, Cleveland Open Cup, °C, ASTM D92

180

Color, Visual

Red

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

04-2024