Mobil 1™ ESP X4 0W-40
Mobil passenger-vehicle-lube , Australia
Product Description
Mobil 1™ ESP X4 0W-40 is an advanced full synthetic engine oil specifically designed to provide outstanding wear protection, engine cleanliness, and strong durability to keep your engine running like new.
Mobil 1™ ESP X4 0W-40 combines durability and protection with a low friction engine oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs).
Mobil 1™ ESP X4 0W-40 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered European vehicles that require SAE 0W-40 viscosity grades.
Features and Benefits
Mobil 1™ ESP X4 0W-40 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF) and Gasoline Catalytic Converters (CAT). Mobil 1™ ESP X4 0W-40 has been designed to help deliver outstanding performance and protection.
Key features and potential benefits include:
• Reduce particulate buildup in diesel particulate filters
• Reduce poisoning of gasoline catalytic converters
• Reduce deposits and sludge buildup to enable long and clean engine life
• Reduce oil aging, allowing extended drain interval protection
Applications
Mobil 1™ ESP X4 0W-40 is recommended for high-performance gasoline and diesel engines in the latest passenger cars, SUVs and light vans that require SAE 0W-40 viscosity grades.
• Mobil 1™ ESP X4 0W-40 helps to protect exhaust gas after-treatment systems designed to limit engine emissions.
• Mobil 1™ ESP X4 0W-40 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications
Specifications and Approvals
This product has the following approvals: |
Porsche A40 |
PORSCHE C40 |
VW 511 00 |
MB 229.52 |
MB 229.51 |
This product is recommended for use in applications requiring: |
API CF |
ACEA C2-21 Application Suitable |
This product meets or exceeds the requirements of: |
API SP |
Recommended by ExxonMobil for applications requiring ACEA C2 |
FIAT FIAT 9.55535-S2 |
Properties and Specifications
Property |
|
Grade |
SAE 0W-40 |
Total Base Number, mgKOH/g, ASTM D2896 |
9.1 |
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
3.8 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
13.9 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
72 |
Viscosity Index, ASTM D2270 |
201 |
Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684 |
21100 |
Density @ 15 C, g/ml, ASTM D4052 |
0.846 |
Pour Point, °C, ASTM D97 |
-54 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
230 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
07-2024