Mobil 1™ ESP 0W-40
Mobil passenger-vehicle-lube , Austria
Product Description
Mobil 1™ ESP 0W-40 is a fully synthetic engine oil designed to help provide exceptional cleaning power, wear protection and overall performance. Mobil 1 ESP 0W-40 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in both diesel and gasoline powered automobiles. Mobil 1 ESP 0W-40 meets or exceeds the requirements of many leading industry and car manufacturers' standards required for newer modern diesel and gasoline powered passenger car engines.
Features and Benefits
Mobil 1 ESP 0W-40 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters (CAT's). Mobil 1 ESP 0W-40 has been designed to help deliver outstanding performance and protection in conjunction with potential fuel economy benefits. Key features and potential benefits include:
|
Features |
Advantages and Potential Benefits |
|
Low Ash Content |
Helps to reduce particulate build up in Diesel Particulate Filters |
|
Low Sulphur and Phosphorous content |
Helps to reduce poisoning of Gasoline Catalytic Converters |
|
Active cleaning agents |
Helps to reduce deposits and sludge build-up to enable long and clean engine life |
|
Outstanding thermal and oxidation stability |
Helps to reduce oil aging allowing extended drain interval protection |
|
Low oil consumption |
Less hydrocarbon pollution |
|
Enhanced frictional properties |
Potentially aids fuel economy |
|
Excellent low temperature capabilities |
Quick cold weather starting and ultra fast protection Helps to extend engine life |
Applications
Mobil 1 ESP 0W-40 is recommended for all types of modern automobile engines, especially the high-performance gasoline and diesel engines found in the latest passenger cars, SUVs and light vans.
Mobil 1 ESP 0W-40 has the General Motors Service Fill dexos2™ approval, which is required for all 2010 new GM/Opel/Vauxhall/Chevrolet Diesel and Gasoline models. GM/Opel have advised that dexos2™ specification is backward compatible to older GM/Opel specifications (GM-LL-A-025 and GM-LL-B-025). The majority of GM/Opel/Vauxhall/Chevrolet Diesel and Gasoline vehicles can use dexos2™ lubricants.
Mobil 1 ESP 0W-40 is especially suitable for extreme conditions, where conventional oil often may not perform
It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Specifications and Approvals
|
This product has the following builder approvals: |
|
GM dexos2 |
|
MB-Approval 229.31 |
|
MB-Approval 229.51 |
|
This product is recommended by ExxonMobil for use in applications requiring: |
|
API CF |
|
GM-LL-A-025 |
|
GM-LL-B-015 |
|
This product meets or exceeds the requirements of: |
|
ACEA C3 |
|
API SM |
|
FIAT 9.55535-S2 |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 0W-40 |
|
Ash, Sulfated, mass%, ASTM D874 |
0.8 |
|
Density @ 15 C, g/ml, ASTM D4052 |
0.845 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
234 |
|
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
3.76 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
13.2 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
73 |
|
Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684 |
26400 |
|
Phosphorus, mass%, ASTM D4951 |
0.08 |
|
Total Base Number, mgKOH/g, ASTM D2896 |
7.8 |
|
Viscosity Index, ASTM D2270 |
176 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
12-2020