Mobilux™ EP Series
Mobil grease , Austria
Product Description
Mobilux EP 0, 1, and 2 products are a high performance family of general-purpose industrial greases. These lithium hydroxystearate greases are formulated to provide extra protection against wear, rusting and water washout. They are available in NLGI grades ranging from 0 to 2, with base oil viscosities ISO VG 150.
Mobilux EP 0, 1, and 2 greases are recommended for most types of industrial applications including heavy-duty applications where high unit pressures or shock loads are present. These greases provide excellent protection against rust and corrosion and resist water wash-out which makes them particularly suitable for equipment where moist or wet conditions are common. Mobilux EP 0 and 1 are suitable for centralised systems. Mobilux EP 2 are general-purpose greases. The recommended operating temperature range is from -20ºC to 130ºC, but they may be used at higher temperatures if the lubrication frequency is increased accordingly.
Features and Benefits
Mobilux EP greases have a long history of proven performance and have demonstrated superior performance versus competitive products in the areas of corrosion protection, low temperature pumpability and high temperature service life. A Timken OK load of 40 lb illustrates their load carrying and extreme pressure capability.
• Reduced wear under heavy or shock loading and vibration for good equipment reliability and availability
• Protection against rust and corrosion and resistance to water washout for equipment protection and good lubrication even in presence of water
• Extended bearing life potential in wet environments for reduced bearing costs and unanticipated downtime
• Good pumpability in centralised systems (Mobilux EP 0 and 1)
Applications
• Mobilux EP 0 and EP 1 provide good low temperature pumpability and are suitable for centralised lubrication systems and other applications where low temperature performance is required.
• Mobilux EP 2 is recommended for multipurpose applications in antifriction and plain bearings, bushings and pins under normal operating conditions.
Specifications and Approvals
This product has the following approvals: |
MOBILUX EP 0 |
MOBILUX EP 1 |
MOBILUX EP 2 |
VOLVO 97718 |
|
|
X |
This product meets or exceeds the requirements of: |
|
|
|
DIN 51825:2004-06 - KP 1 K -20 |
|
X |
|
DIN 51825:2004-06 - KP 2 K -20 |
|
|
X |
DIN 51826: 2005-01 GP0G-10 |
X |
|
|
Properties and Specifications
Property |
MOBILUX EP 0 |
MOBILUX EP 1 |
MOBILUX EP 2 |
Grade |
NLGI 0 |
NLGI 1 |
NLGI 2 |
Thickener Type |
Lithium |
Lithium |
Lithium |
Copper Strip Corrosion, 24 h, 100 C, Rating, ASTM D4048 |
1A |
1A |
1A |
Dropping Point, °C, ASTM D2265 |
190 |
190 |
190 |
Four-Ball Extreme Pressure Test, Weld Point, kgf, ASTM D2596 |
250 |
250 |
250 |
Four-Ball Wear Test, Scar Diameter, mm, ASTM D2266 |
0.4 |
0.4 |
0.4 |
Penetration, 60X, 0.1 mm, ASTM D217 |
370 |
325 |
280 |
SKF Emcor Rust Test, Distilled Water, ASTM D6138 |
0 , 0 |
0 , 0 |
0 , 0 |
Timken OK Load, lb, ASTM D2509 |
40 |
40 |
40 |
Viscosity @ 100 C, Base Oil, mm2/s, ASTM D445 |
14.8 |
14.8 |
14.8 |
Viscosity @ 40 C, Base Oil, mm2/s, ASTM D445 |
160 |
160 |
160 |
Viscosity Index, ASTM D2270 |
91 |
91 |
91 |
Health and Safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
08-2024