All website features may not be available based upon your cookie consent elections. Click here to update settings.

Mobil Super™ All-In-One Protection Turbospeed 5W-30

Mobil passenger-vehicle-lube , Thailand

Full synthetic engine oil delivering All-In-One Protection for diesel engines

Product Description

Mobil Super™ All-In-One Protection Turbospeed 5W-30 is a full synthetic engine oil delivering All-In-One Protection for diesel engines.  It is formulated with Heat Activated Anti-WearTM molecules for superior engine protection in high temperature.  Meets or exceeds the requirements of the highest engine oil performance standards.

 

Features and Benefits

• Full synthetic engine oil delivering protection for diesel engines

• All-weather protection for longer engine life

• Heat-activated anti-wear protection

• 79% better engine wear protection*

• Protection in stop and go traffic

• Improve engine efficiency by reducing Engine Low Speed Pre-Ignition (LSPI)

• Outstanding wear protection and engine cleanliness

• Excellent high temperature protection under severe operating conditions

 

* Based on ASTM D6891 (Seq. IVA) test results versus API SN engine test requirement

 

Applications

Mobil Super™ All-in-One Protection Turbospeed 5W-30 is suitable for use in the latest diesel pickup trucks, SUVs, vans, and cars including Isuzu, Toyota, Mitsubishi, Ford and Nissan.

 

Recommended for turbocharged, intercooler and common rail diesel engines.

 

Always consult your owner's manual to check the recommended viscosity grade and specifications for your particular vehicle.

 

Specifications and Approvals

 

This product is recommended for use in applications requiring:

API CG-4

API CF-4

API CF

 

This product meets or exceeds the requirements of:

API SN PLUS

API SN

API SM

 

Properties and Specifications

Property

 

Grade

SAE 5W-30

Mini-Rotary Viscometer, Apparent Viscosity, -35 C, mPa.s, ASTM D4684

29800

Viscosity Index, ASTM D2270

165

Total Base Number, mgKOH/g, ASTM D2896

11

Pour Point, °C, ASTM D97

-39

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

74

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

12.3

Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683

3.5

Flash Point, Cleveland Open Cup, °C, ASTM D92

240

Density @ 15 C, g/ml, ASTM D1298

0.857

Ash, Sulfated, mass%, ASTM D874

1.2

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

07-2024

ExxonMobil Marketing (Thailand) Limited

3195/26, 22nd Floor, Rama IV Road

Klong Ton, Klong Toey District

Bangkok 10110

Thailand

 

+66 2 407 4000

http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.