DISCONTINUED - The recommended replacement is Mobil DTE Oil 205.
Mobil DTE Oil 105 is a lubricating oil formulated to provide good antiwear and friction-reducing properties, as well as protection against rust and corrosion. It exhibits excellent resistance to washing by water and other entrained liquids, and resists oxidation. At the same time, it provides effective lubrication at low feed rates, thereby extending operating periods between valve-cleaning intervals.

• Effective lubrication at low feed rates
• Good anti-wear and friction reducing properties
• Rust and corrosion protection
• Excellent resistance to washing be water and other entrained liquids
• Resists oxidation

Mobil DTE Oil 105 lubricant is recommended for the cylinder lubrication of reciprocating compressors and special rotary sliding vane compressors in air and inert gas service. It is particularly applicable where wet gas is being compressed. While developed primarily for multistage compressors, its superior qualities will provide benefits in many single- and two-stage compressors operating at higher pressures or discharge temperatures or when compressing wet gas.

Mobil DTE Oil 105 is recommended for use in very high exhaust gas temperatures and medium to high pressures. It is not designed for use in compressor crankcases, particularly those compressors having high lead bearings, or crankshafts fitted with lead counterweights.

It should not be used when compressing air for breathing.

Based on available toxicological information, it has been determined that these products pose no significant health risk when used and handled properly. Information on use and handling, as well as health and safety information, can be found in the Material Safety Data Sheets which can be obtained from your local distributor and via the Internet on http://www.msds.exxonmobil.com.

For additional information or to identify the nearest U.S. Mobil supply source, call 1-800-662-4525.