Search Find an MSDS
Mobil ATF+3 Pdf
Automatic Transmission Fluid Print View
Product DescriptionFeatures and BenefitsApplicationsSpecifications and ApprovalsTypical PropertiesHealth and Safety 

Product Description

Mobil ATF+3, used as makeup or full fill, is specially formulated to ensure optimal performance in Chrysler transmissions and transaxles. Its unique additive package provides the proper frictional properties, excellent low-temperature fluidity and dependable wear protection required in applications where a Chrysler MS 7176 type fluid is recommended.



Features and Benefits

The outstanding performance features of Mobil ATF+3 offer the following advantages in MS-7176E applications:



  • Excellent flow properties at low start-up temperatures and high operating temperatures
  • Improved shift performance and vehicle driveability/improved shudder performance in Chrysler vehicles
  • Good viscosity stability
  • Excellent oxidation stability, less fluid breakdown in high-temperature service
  • Dependable protection against rust and corrosion
  • Provides more assured wear protection for maximum transmission/transaxle life

Applications

Mobil ATF+3 is an automatic transmission/transaxle fluid specially formulated for DaimlerChrysler Corporation vehicles, including Dodge, Plymouth, Eagle and certain Jeeps, that require a fluid meeting Chrysler specification MS-7176E® and earlier Chrysler specifications. It is also recommended for Mitsubishi and Hyundai applications where an MS-7176 type fluid is specified.

Mobil ATF+3 is not recommended for vehicles that require Ford Mercon® or General Motors Dexron® type fluids. For these applications, Mobil Multi-Purpose is recommended.

Mobil ATF+3 can be used in other services that specify an MS-7176E type fluid, including certain manual transmissions, transfer cases and power steering units.

Note: Use of fluids that do not meet the MS-7176E specification can impair performance, causing transmission shudder, rough shifting and unsatisfactory vehicle driveability. Use of non-approved fluids also may invalidate new vehicle warranties.

Automatic transmissions should be checked for proper fluid levels at regular intervals, and the fluid should be changed at manufacturer-recommended intervals. However, this may vary due to your vehicle's operating conditions. Some manufacturers recommend more frequent changes of transmission fluid under severe driving conditions, such as heavy traffic, hot weather and trailer pulling.



 
Back to Top

Specifications and Approvals

Mobil ATF+3

Chrysler MS-7176EX


Typical Properties

Mobil ATF+3®

Viscosity 
cSt @ 40ºC33.7
cSt @ 100ºC7.6
cP @ -40ºC 18,000
Viscosity Index200
Flash Point, ºC (ºF)180 (356)
Pour Point, ºC (ºF)-42 (-44)
Gravity, API31
ColorRed




  Back to Top

Health and Safety

Based on available toxicological information, it has been determined that these products pose no significant health risk when used and handled properly. Information on use and handling, as well as health and safety information, can be found in the Material Safety Data Sheets which can be obtained from your local distributor; via the Internet on http://www.mobil.com.

For additional technical information or to identify the nearest U.S. Mobil supply source call 1-800-662-4525.

ATF+3 and MS-7176E are registered trademarks of DaimlerChrysler Corporation. Used with permission.



Exxon Mobil Corporation
3225 Gallows Road
Fairfax, VA 22037
1-800-ASK MOBIL (275-6624)

Due to continual product research and development, the information contained herein is subject to change without notification.
Typical Properties may vary slightly.  This product data sheet is based on global product data sheets for use with products purchased in the U.S.
© 2007 Exxon Mobil Corporation.  All rights reserved.
  ExxonMobil Home   |    Help   |    Sitemap   |    Contact Us   |    Privacy & Legal