Search Find an MSDS
UNIVOLT N 61 B Pdf
Electrical Insulating Oil Print View
Product DescriptionFeatures and BenefitsApplicationsSpecifications and ApprovalsTypical PropertiesHealth and Safety 

Product Description

Univolt N 61B is a transformer oil that provides cooling, insulating, arc quenching, and cleaning properties while meeting the requirements of an ASTM D 3487 Type II fluid.  Univolt N 61B is a fully inhibited Type II oil, which provides outstanding performance in transformers, circuit breakers, switches, and capacitors.



Features and Benefits

Univolt N 61B is manufactured from carefully selected base stocks favored by the domestic power industry under stringently controlled manufacturing conditions.  It meets the demanding requirements of the ANSI/ASTM D 3487 specification for electrical insulating oils.



  • Excellent impulse strength
  • Excellent oxidation stability
  • Long service life
  • Low power factor
  • Low static charging tendency

Applications

Univolt N 61 B is normally recommended for distribution transformers in the field.

In that temperatures inside a distribution transformer may reach 100C, proper unit design is essential including hermetic sealing.  Since Univolt N 61B is a mineral oil type product, flammability makes the product unacceptable for units placed inside buildings.



 
Back to Top

Specifications and Approvals

Univolt N 61 B meets or exceed the following industry specifications:

ANSI/ASTM Type II 


Typical Properties

Univolt N 61 B

Viscosity, cSt, 40C, ASTM D 445 9.8
Viscosity, cSt, 100C, ASTM D 445 2.4
Aniline Point, C, ASTM D 611 70.4
Color, ASTM D 1500 LO.5
Corrosive Sulfur, ASTM D 1275 noncorrosive
Pour Point, C, ASTM D 97 -50
Flash Point, C, ASTM D 92 149
Specific Gravity, D 1298 0.8890
Interfacial Tension, 25C, dynes/cm, ASTM D 971 46
Neutralization Number, mg KOH/g, ASTM D 974 ‹0.01
Water, ppm, ASTM D 1533 15
Dielectric Strength, kV, ASTM D 877 40




  Back to Top

Health and Safety

Refer to the Material Safety Data Sheet for safety and health information.
Material Safety Data Sheets can be obtained from your local distributor; via the Internet on http://www.msds.exxonmobil.com.

The Mobil logotype, the Pegasus design, and Univolt are trademarks of ExxonMobil Corporation, or one of its subsidiaries.



Exxon Mobil Corporation
3225 Gallows Road
Fairfax, VA 22037
1-800-ASK MOBIL (275-6624)

Due to continual product research and development, the information contained herein is subject to change without notification.
Typical Properties may vary slightly.  This product data sheet is based on global product data sheets for use with products purchased in the U.S.
© 2007 Exxon Mobil Corporation.  All rights reserved.
  ExxonMobil Home   |    Help   |    Sitemap   |    Contact Us   |    Privacy & Legal